Clicky

How To Convert the Bearings and Distances to Coordinates

How to Convert Bearings And Distances to Coordinates

In This Article I will explain how to convert bearings and distance to coordinates.

Let’s Start,

Given a known Bearing (θ) & Horizontal Distance (Hz Distance) from a known point (Eo , No), the
coordinates (Ep , Np) may be calculated as follows:

How To Convert Bearings and Distances to Coordinates

This works for ALL bearings <36

Hand Calculating

(1) It is important to carry out the above calculation in the correct sequence:

Sin(θ) x Hz Distance is not the same as Sin(θ x Hz Distance)

(2) Typing the above formulae into the Scientific Calculator, it may be necessary to enter the
bearing before the SIN/COS functions.

Eg, θ [SIN] [x] Hz Distance etc.

Microsoft Excel

The calculation may also be done using an Excel spreadsheet.
Note, that Excel assumes angles are measured in the “radians” & so the Bearing (measured in the
Degrees) must be converted using the “RADIANS(x)” function.

=(SIN(RADIANS(Bearing)) x Hz Distance)+East 0
=(COS(RADIANS(Bearing)) x Hz Distance)+North 0

Where “Bearing” is the known bearing in the degrees (or decimal degrees) and Hz Distance is the known
Horizontal Distance.

Learn More

Interview Question and Answer For Land Surveying

What is The Contour Mapping

Types Of Curves In Surveying Work

How to calculate the RL of temporary benchmark on the site

Rise and fall method with Examples

How to calculate The gradient, run and rise in civil construction

Example

Q: Calculate the coordinates of an unknown point measured from the Survey Station at known
coordinates (123.456mE, 456.789mN), given a measured Bearing of 127.5 degrees and the measured
Horizontal Distance of 34.567m?

A=

Easting=

Sin (127.5) = 0.79335334 Hint: U may need to enter 127.5 SIN on the calculator

x 34.567    = 27.42384491
+ 123.456 = 150.880m  = East

B=

Northing=

Cos(127.5) = -0.608761429 Hint: Take care to note the “negative” sign
x 34.567    = –21.04305632
+ 456.789 = 435.746m   = North

Note: The figures in RED show the “differences” in the position between the Survey Station & the
Unknown point. In this case, the point lies 27.424m to the EAST & 21.043m to the SOUTH of
Survey Station. As a check, this is where would expect the bearing 127.5 degrees to the point to.


Learn More

How To Calculate The Asphalt Quantity For Road Work

Types Of Scales In Surveying

What is Alignment of Road

Linear measurements in the surveying by Direct Method

How To Calculate The Height Of Any Buildings And An Objects Using With Theodolite


Thanks For Reading this article. Please, Don’t Forget to Share it.

To Get More Information, Visit Our Official website.

.
Land Surveying & Architects

JOIN US & LIKE OUR OFFICIAL FACEBOOK PAGE

THANKS.

About Raja Junaid Iqbal

Hi My name is Raja Junaid Iqbal and i am Land Surveyor by Profession but I've specialized in the field of Q,S and land development. As Professional Surveyor I engaged my self in all over the Gulf since 14 years.

Check Also

Hight of Instruments

How to Calculate the RL by HI method in surveying

How to Calculate the RL by HI Method in Surveying. In this article i will …

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!